Carbide burs are among the most favored and versatile cutting tools used in practically every industry. Constructed from Tungsten Carbide they are primarily accustomed to remove burrs (the little flakes of metal) that always stick to the job piece as soon as the machining process. Burs can be found in standard lengths long series (for difficult to reach applications) along with miniature sizes (to be used in pencil grinders).
Features
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but they are more brittle and must be utilized with rigid tool holding systems
Uncoated tools feature exactly the base substrate with no additional treatment or coatings and are ideal for many applications
Round shanks allow use using a wide selection of tool holding systems
Double-cut style has rows of cutting teeth cut in two intersecting directions for fast material removal and a rougher finish
For deburring, interior contour work
CUT TYPE
Singlecut
General purpose tool for cast iron, copper, brass and steels
Fairly aggressive cutting action, with higher material removal rates
It leaves a nice finish of all all materials, however the bite can be demanding on operators
Doublecut
For general purpose use including surefire, copper, brass and steels
The Doublecut works with a cross flute of exactly half the volume of standard flutes in the opposing helix
Sliver dimension is reduced, out of the box the operator fatigue through the balanced cutting forces
Lower RPMs may be utilized with little negative influence on performance
The decreased load means operator’s often feeding it more aggressively
Alumacut
Ideal for all non-ferrous, non-metallic workpieces like aluminum, zinc, plastic, wood, etc.
A very aggressive cutting action, with little or no probability of plugging these flutes up
Diamondcut
Is really a finer cut of opposing helixes
Operating control is excellent for the reason that biting action is limited as is also the silver size made out of it
This version tends to be preferred to get where titanium and other difficult materials (superalloys) are increasingly being deburred
With all the teeth being smaller and better fragile therefore, tool every day life is not normally a matter of import
Fiberglass tends to cut nicely with Diamondcut
Chipbreaker
Another sort of the Doublecut, this is the slightly less aggressive tool whose main objective is always to simply interupt the cut
One single, opposing helix is ground inside a spiral throughout the tool, typically
Silver size fails, surface finish goes down marginally, hand control climbs up, marginally
For details about https://www.burrs4less.com/sa-9-31.html check our new web portal