Carbide Burrs (often known as Rotary Burrs) bring cutting, shaping, grinding but for the removing sharp edges, burrs and excess material (deburring).
1. What material can Carbide Burrs supply on?
Carbide burrs may be used on many materials. Metals including steel, aluminum and cast iron, various wood, acrylics, fibreglass and plastics. When utilized on soft metals for example gold, platinum and silver, carbide burrs are great as they lasts a long time without any chipping or breaking.
Steel, Carbon Steel & Metal
Certain
Aluminium
Titanium
Cobalt
Nickel
Gold, Platinum & Silver
Ceramics
Fibreglass
Plastic, Graphite Reinforced Plastic (CRP), Glass Fibre Reinforced Plastic (GRP)
Brass, Copper & Bronze
Zinc
Wood
Different cuts of carbide burrs will likely be ideal to specific materials, start to see the next point below to discover more on different cuts.
So what can You have Carbide Burrs In?
Ideally carbide burrs are employed in Air Tools i.e Die Grinders, Pneumatic rotary tools and speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools like a Dremel.
Always use a handpiece that runs true i.e without wobble.
Who Uses Carbide Burrs?
Carbide burrs are popular for metalwork, tool making, engineering, model engineering, wood carving, jewellery making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. And they are utilized in the aerospace, automotive, dental, metal sculpting, and metal smith industries to call but a few.
2. Carbide Burrs Commonly Are available in Two Cuts; Single Cut and Double Cut (Diamond Cut)
Single cut (one flute) carbide burrs possess a right handed (Up cut) spiral flute. These usually are used in combination with stainless, hardened steel, copper, cast iron, and ferrous metals and will remove material quickly with a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy elimination of material
Milling
Deburring
Cleaning
Creates long chips
Double cut carbide burrs are generally utilized on ferrous and non ferrous metals, aluminium, soft steel and also for all non-metal materials for example plastics and wood. They have more cutting edges and will remove material faster. Double cut are occasionally referrred to as Diamond Cut or Cross Cut (2 flutes cut across the other) will leave a smoother finish than single cut because of producing smaller chips while they cut away the fabric. Use for medium-light stock removal, deburring, finishing and cleaning. A double cut carbide burr is among the most popular cut and will look at you through most applications.
Medium- light removal of material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
3. What Speed or RPM if you work with your Carbide Burrs?
The rate at which you have your carbide bur in your rotary tool is determined by the information you’re using it on as well as the contour being produced but it is pretty sure you don’t need to exceed speeds of 35,000 RPM.
4. Tend not to Apply Too Much Pressure
Like all drill bits and burrs, permit the burr perform the work and apply merely a little pressure otherwise the cutting edges with the flutes will chip away or become smooth prematurely, decreasing the lifetime of your burr.
5. Carbide Burrs are not as easy Than HSS Burrs
Our Carbide Burrs are machine ground coming from a specially chosen grade of carbide. Due to the extreme hardness of the Tungsten Carbide they can be suited for considerably more demanding jobs than HSS (High Speed Steel).
Carbide Burrs also perform better at higher temperatures than HSS so that you can run them hotter, as well as for longer.
HSS burrs will quickly soften at higher temperatures so carbide is definitely a better choice for long term performance.
What are Features of Tungsten Carbide Burrs?
Durability
Use for lengthy production runs
High stock removal
Ideal for using on many hard and tough materials
Perfect for Deburring, finishing, carving, shaping and smoothing welds, moulds, dies and forgings
6. Maintain your Carbide Burr On the road
When using your carbide burr don’t ensure that it stays still for too much time because this may prevent the burr from digging and jabbing in your material causing unsightly marks and roughness.
End on an ‘up’ stroke for any smoother finish for your work.
Stay Safe:
Always ensure your burr shank is well inserted to your collet and clamped down tightly
Keep pressure light whilst the bur moving, focusing on the very best material first
Ensure your effort is secured tightly in your workbench
Don’t snag or jam your burr into the work
Wear eye protection at the least, but even better utilize a full shield to your face
More details about SF-1 Carbide Burrs you can check this internet page