SA-3 cylinder shape burrs are great for interior contour work and deburring. Because of the extreme hardness with this tungsten carbide, you can use it on far more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs tend to be utilized on ferrous and non-ferrous metals, soft steel, and for all non-metal materials for example stone, plastics, wood, and ceramic. Double cut burrs will leave a slightly smoother finish than single cut because of producing smaller chips because they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is the most popular cut and can look at you through most applications.
Machines Applied to:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are perfect for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed is decided from the material you use your burr on. If you happen to be experiencing chipping, you’re probably operating at too much of speed for that application. Start having a slower speed and increase in the process before you reach the the best results
Apply light pressure and allow the tool do the work. Bearing recorded on the tool can result in reduced tool life plus a dull burr.
Always wear proper PPE to feature (although not restricted to) safety glasses, hearing protection, respirator, and hand protection. Keep all guards in place on the machine.
Avoid experience electric power drills; the slower speeds may result in chipping of one’s workpiece.
Check out about SA-3 Carbide Burrs you can check this useful internet page